GST102A/104A/108A/116A Conventional Fire Alarm Control Panel

    ☆ 2/4/8/16 zone conventional fire alarm panels
    ☆ A maximum of 32 fire detectors can be installed per zone.
    ☆ Each zone can be configured to operate in fire alarm (default) or supervisory alarm mode.
    ☆ Both End of Line Resistor and Active End of Line options are available.
    ☆ One alarm output can be configured as 24V or Normally Open/Normally Closed (N/O, N/C).
    ☆ Three sounder outputs are provided: output 1 can be set for 24V or N/O N/C, while outputs 2 and 3 only operate as 24V.
    ☆ One Disable/supervisory relay output (N/O COM N/C) is included.
    ☆ One Fault output (N/O COM N/C) is provided.
    ☆ One Auxiliary power output:
    ☆ Simple operation allows enabling/disabling of zones, sounder outputs, and alarm output.
    ☆ Various Silence/Reset/Test modes can be selected to comply with local requirements.
    ☆ Remote controls are available for silencing, evacuating, and resetting.
    ☆ Three access levels can be set using key control.
    ☆ Repeater output is available.
    ☆ Optional relay output board is available.
    ☆ LPCB Approved

Technical Specifications

    ☆ Standards: EN54-2, EN54-4
    ☆ Approvals: LPCB, CE
    ☆ Power Supply: 220V/230VAC +10%-15% 50/60Hz
    ☆ Operating Environment:
            Temperature: 0℃ ～+40℃
               Relative Humidity: 95%, non-condensing
    ☆ Dimensions: 330mm×98mm×320mm